Instructions - Click TF-A02 Instruction Manual

Instructions

Using the tower fan
This tower fan is equipped with three
wind speeds, an oscillation function, a
2-hour timer and an easy to use control
panel on top of the unit.
• STEP 1: Before connecting to the
power supply, please check whether
the voltage displayed on the product
is consistent with your power supply
voltage. Then plug in the power
supply.
• STEP 2: To turn on the tower fan,
select the desired cooling speed by
pressing the fan speed buttons. Speed
setting [ 1 ] gives you the lowest wind
speed, setting [ 3 ] the strongest.
• STEP 3: To use the tower fan for a set
period of time, turn the timer control
dial in a clockwise direction to select
the desired time.
Fig. 3
8
AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761 |
Once set, the timer control will run
its course but can be interrupted and
stopped by turning the timer control
dial in an anticlockwise direction to
the [ OFF ] position.
• STEP 4: Activate the swing function
by pressing the oscillation (OSC)
switch at the back of the unit to the
ON [ I ] position. The fan will now
oscillate 60° from one side to the
other. Press the switch to the OFF
[ O ] position to stop the swing.
• STEP 5: Turn off the fan by pressing
the [ 0 ] button and turning the timer
control dial in an anticlockwise
direction to the [ OFF ] position.
Unplug the tower fan when it is not
in use.
info@tempo.org