Advertisement
Two-Hand Tray Adjustment
• The tray can also be adjusted with two hands:
– Press both side latches located underneath the tray and
move the tray forward or backward.
– Release both side latches to lock the tray in the desired
position.
Tray Removal
• Press both side latches underneath the tray and lift.
• The tray can also be removed with one hand:
– Press either side latch located underneath the tray.
– Lift the tray and then push it off the opposite arm.
Cleaning
We recommend that you periodically clean and inspect the
Fisher-Price
®
Adjustable High Chair to be sure it functions prop-
erly. The tray, frame, and pads can be cleaned with a sponge and
a mild soap and water solution. Do not immerse the tray or
pad. To remove the restraint belts and pads for additional clean-
ing, refer to the instructions which follow.
To remove the pads:
• Unfasten the fastener straps from underneath the Adjustable
High Chair to remove the lower pad.
• Remove the two tabs from the pegs on the seat back, and
unfasten the fasteners on both sides of the seat to remove the
upper pad.
If you have any questions about this product: In Canada, call 1-800-567-7724, or write to: Mattel/Fisher-Price, 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
In Great Britain, telephone 01734 770488. In Australia, call the Fisher-Price Australian Consumer Advisory Service toll-free at 1-800-800-812, or write to:
Fisher-Price, Mattel Pty. Limited, 461 Plummer Street, Port Melbourne,Victoria 3207.
Operation and Use
Side Latch
Side Latch
"T" End
To remove the restraint belts:
• Turn the Adjustable High Chair so that the back is facing you.
• Locate the "T" end of one of the the restraint straps and fold
it flat.
• Insert the "T" end of the restraint strap through the slot in the
seat back.
• Repeat this procedure to remove the other restraint straps.
Please Note: To clean the restraint belts, hand or machine
wash them in a mild detergent and warm water. Tumble dry on
a low temperature.
Waist Belt
Free End
To replace the restraint belts:
• Turn the Adjustable High Chair so that the front is facing you.
• Fold the "T" end of one of the waist belts flat.
• Insert the "T" end of the waist belt through the slot in the
seat back.
• Repeat this procedure to attach the other waist belt.
• Pull the waist belts forward to be sure they are secure.
• Make sure the free end of each waist belt is toward the out-
side of the Adjustable High Chair.
• Fold the "T" end of the crotch belt flat and insert it into the
slot behind the seat cushion.
• Pull up on the crotch belt until you feel resistance to be sure
it is secure.
8
Slots
Waist Belt
Free End
Crotch Belt
Advertisement
