AEMC MR417 User Manual page 4

Thank you for purchasing the Current Probe Model MR417 or MR527. For best
results from your instrument and for your safety, read the following operating
instructions carefully and comply with the precautions for use.
This instrument is compliant with the IEC 61010-2-032 safety standard for voltages
of 300V with respect to earth in measurement category IV, or 600V in category III.
Symbols
WARNING, risk of DANGER! The operator must refer to these instructions
whenever this danger symbol appears.
Application or withdrawal authorized on conductors carrying dangerous
voltages. Type A current sensor as per IEC
Equipment is protected by double insulation.
Battery.
USB.
Useful information or tip.
Direction of the current.
The product is declared recyclable following an analysis of the life cycle in
accordance with standard ISO 14040.
The CE marking guarantees conformity with European directives and with
regulations covering EMC.
The trash can with a line through it means that in the European Union, the
product must undergo selective disposal for the recycling of electric and
electronic material, in compliance with Directive WEEE 2002/96/EC.
Definition of Measurement Categories (CAT)
CAT IV Corresponds to measurements taken at the source of low-voltage
installations.
Example: power feeders, counters and protection devices.
CAT III Corresponds to measurements on building installations.
Example: distribution panel, circuit-breakers, machines or fixed industrial devices.
CAT II Corresponds to measurements taken on circuits directly connected to low-
voltage installations.
Example: power supply to domestic electrical appliances and portable tools.
4
61010-2-032.
Current Probe Models MR417/MR527