Maintenance; Cleaning; Battery Replacement - AEMC MR417 User Manual

Except for the battery, the instrument contains no parts that can be
replaced by personnel who have not been specially trained and
accredited. Any unauthorized repair or replacement of a part by an
"equivalent" may gravely impair safety.

4.1 Cleaning

Disconnect the instrument completely.

Use a soft cloth, dampened with soapy water.

Rinse with a damp cloth and dry rapidly with a dry cloth or forced air.

Do not use alcohol, solvents, or hydrocarbons.

Keep the clamp jaws as clean as possible.


4.2 Battery Replacement

The battery must be replaced if the ON indicator remains unlit when the instrument
is turned ON.
1. Disconnect the instrument completely and set the switch to OFF.
2. Remove the battery compartment cover from the instrument casing (see
3. Remove the old battery.
4. Insert the replacement battery into the snap-in battery connector, and place it
into the battery compartment.
5. Replace the battery compartment cover.
Spent batteries must not be treated as ordinary household waste. Take
them to the appropriate collection point for recycling.
Current Probe Models MR417/MR527

4 MAINTENANCE

2.1).
§
31