Table of Contents
Advertisement
16
TROUBLESHOOTING
Problem
The displayed level is 0
The display is blank
The analog output
provides always 4 mA or
20 mA
The analog output
provides always 0 mA
Probable cause
Incorrect input
Cable disconnected
Blown fuse
Current output range not properly
programmed
Cable disconnected
Solution
Check that the input type
programmed in the menu matches
the connection made (see page 15)
Connect the cable between the
level sensor and the MT03L
Change the fuse
Program the range properly (see
page 20)
Check the cable connection
31
Advertisement
Table of Contents
