Table of Contents
Advertisement
5
MAIN MENU
To access the main menu of the converter, press the key (Enter). The following screen
appears:
The "Installation" option
Chapter 6 of this manual.
The "Programming" option allows to program all parameters of the converter, as explained in
Chapter 7 of this manual.
The options "Software Version" and "Serial Number" are informative and are discussed in
Chapters 8 and 9 of this manual.
5.1
Passwords to access the menus
The password for the installation menu may be different from the password for the program
menu.
By default, the equipment is factory configured with the password disabled.
If you want to change any of these
passwords, you must enter the
corresponding menu and once inside,
access the submenu "Password".
allows the basic configuration of the instrument, as
12
Number of menu items
Selected item
To change the access password of
the
installation
"Installation" on the main menu and
then "Password".
explained in
menu,
select
Advertisement
Table of Contents
