Table of Contents
Advertisement
6.1
Language
The language in which all the menus will be displayed can be chosen.
6.2
Input
In this screen the type of signal from the sensor connected to the MT03L can be chosen.
Resistance input is compatible with level transmitters of series LE and transmitters LTE of
series LT, as well as with other level transmitters based on resistance variation.
Current input is compatible with level transmitters of series LP and LTDR, as well as with
other level transmitters based on 4-20 mA output.
6.3
Limits
They set the relationship between the converter input signal and the displayed value.
6.3.1
Capture
This option is recommended only for those MT03L converters with resistance input, and which
must be connected to a level transmitter not purchased together with the converter or from
another manufacturer.
If the MT03L converter has been acquired together with a Tecfluid level meter, lower and upper
limit capture options are already configured at factory and their programming is not
recommended.
If the converter is connected to a level transmitter through the current input, captures will not be
normally necessary.
15
Advertisement
Table of Contents
