Dimplex DS6650 Owner's Manual page 10

Maintenance
pushing firmly against the
glass. Replace the logset re-
taining screw into the ember
bed.
7. Close the door and turn the
handle ¼ turn to the right or
left.
gLASS CLEANINg
The clear door is cleaned in the
factory during the assembly op-
eration. During shipment, instal-
lation, handling, etc., the clear
door may collect dust particles,
these can be removed by dusting
lightly with a clean dry cloth.
To remove fingerprints or other
marks, the clear door can be
cleaned with a damp cloth. The
clear door should be completely
dried with a lint free cloth to
prevent water spots. To prevent
scratching, do not use abrasive
cleaners or spray liquids on the
clear door surface.
NICKEL DOORS
The nickel doors are hand
finished solid castings. Due to
the nature of the manufacturing
process, the doors may have
some small imperfections. This is
considered normal and adds to
the character of the stove.
10
NICKEL DOOR CLEANINg
To remove fingerprints or other
marks, the clear door can be
cleaned with a damp cloth. The
clear door should be completely
dried with a lint free cloth to
prevent water spots. To prevent
scratching, do not use abrasive
cleaners or spray liquids on the
clear door surface.
STOVE SURFACE CLEANINg
Use warm water only to clean
painted surfaces of the Com-
pact Stove. Do not use abrasive
cleaners.
www.dimplex.com