Axis W100 User Manual page 28

Axis body worn solution
Troubleshooting
Behavior
LED: All flash amber
• LED: All flash red
• Beep: intermittent
• Buzz: intermittent
LED: Docking status flashes amber
LED: Docking status flashes amber,
Storage red
LED: Docking status flashes amber,
Battery red
1. The body worn camera is in shipping mode until it is docked and added to a body worn system. Shipping mode is a power saving mode used
for transportation and storage.
What it means
The camera Is not added in the body
worn system.
A user is not assigned to the camera..
General error
Error when uploading content to the
system controller
Battery is not charging
28
What to do
Add the camera to the body worn system, see Add
cameras.
Dock the camera and assign a user to it, see Assign
a camera to a user.
Try the General troubleshooting steps. If the
problem persists try axis.com/support.
Check he connection between the body worn
camera and the docking station. Check the
connection between the docking station and the
system controller. Make sure that the system
controller is okay, see Check System status.
Try the General troubleshooting steps. If the
problem persists try axis.com/support.