Related Manuals for Axis W10 Series
Summary of Contents for Axis W10 Series
- Page 1 AXIS W10x Body Worn Cameras AXIS W100 Body Worn Camera AXIS W101 Body Worn Camera User manual...
- Page 2 AXIS W10x Body Worn Cameras Axis body worn solution Axis body worn solution For information about the complete body worn solution, see the Axis body worn solution user manual.
-
Page 3: Product Overview
AXIS W10x Body Worn Cameras Product overview Product overview Power button Front recording indicator Display Top button Function button Camera lens Recording button USB connector Microphone (2x) - Page 4 Microphone LED Lights up if you’ve turned off the microphone Wireless connectivity LED Lights up green: Paired with AXIS Body Worn Assistant or a holster sensor. Pulsing amber: Pairing/connecting Lights up red: Failed to pair/connect Sensor camera LED Green: Sensor camera connected...
-
Page 5: Daily Use
4 seconds. stops. Start a live stream Double-press the function button. For more information, see the AXIS Body Worn Live user manual. Stop a live stream Press the recording button for at least 4 seconds. Create a bookmark Press the recording button once The camera vibrates and beeps. - Page 6 • Optionally, use the live view in AXIS Body Worn Assistant to check your camera image, making sure that it is working properly and that the camera orientation is okay. For more information, see AXIS Body Worn Assistant in the body worn solution manual.
-
Page 7: Battery Health
Replace the battery You can replace a body worn camera battery using the AXIS TW1906 Battery Kit 5P. Before you replace the battery, read the installation guide available on the AXIS TW1906 Battery Kit 5P support page. To watch this video, go to the web version of this document. -
Page 8: Charging The Camera
Note Do not replace the 3.7 V ID1058 battery during the period under which the Axis Hardware Product is covered by the Axis 3-year Limited Hardware Warranty. Replacement of the battery carried out by any other party than Axis during the warranty period voids the main item’s warranty. -
Page 9: Operating Time
Location data - When the camera positioning system is on. Wireless connection - When you use AXIS Body Worn Live, AXIS Body Worn Assistant, or turn on broadcasts. Sensor camera - When you connect a sensor camera to the body worn camera. -
Page 10: Troubleshooting
AXIS W10x Body Worn Cameras Troubleshooting Troubleshooting Camera error feedback Use the body worn camera feedback to identify different errors. The table below shows the different camera behaviors, what they mean, and how to solve the problem. Behavior What it means... - Page 11 AXIS W10x Body Worn Cameras Troubleshooting Behavior What it means What to do A user is not assigned to the camera. Dock the camera and assign a user to it, see Assign a user to a camera. • LED: All flash red •...
-
Page 12: Technical Issues, Clues, And Solutions
AXIS W10x Body Worn Cameras Troubleshooting Behavior What it means What to do • Beep: 1 every second minute (Periodic), or 3 every minute (Periodic reinforced) • Buzz: 1 every second minute (Periodic), or 3 every minute (Periodic reinforced) The body worn camera is in shipping mode until it is docked and added to a body worn system. Shipping mode is a power saving mode used for transportation and storage. - Page 13 To make sure that all content has been disconnected physically from the system transferred to the content destination, before it was removed in AXIS Body Worn remove the extension system controller Manager. This prevents the system from in AXIS Body Worn Manager before you verifying the transfer status.
- Page 14 AXIS W10x Body Worn Cameras Troubleshooting Camera doesn’t charge. The camera isn’t docked properly, or there Try the following in the stated order: is something wrong with the docking Camera doesn’t offload files. 1. Undock and dock the camera station.
- Page 15 User manual Ver. M1.11 AXIS W10x Body Worn Cameras Date: December 2023 © Axis Communications AB, 2023 Part no. T10200216...