Haier HTW130-186S User Manual page 6

Change the direction of the drain hoses
The drain hoses in the wash tub when out off factory ,before use the machine,
please screw the drain hose on the drain valve parts , make sure the drain hose
fixing as necessary.
Install the bottom foot
1. Tilt the washing machine slightly from the front of the machine, and install
the Bottom feet with the three mounting pores on the front of the base.
Make sure that the foot buckles be installed in place. (Figure 1)
2. Tilt the washing machine slightly from the back of the machine, and install
the Bottom feet with the two mounting pores on the back of the base.
Make sure that the foot buckles be installed in place. (Figure 2)
Bottom foot
Install the water intake hose
Insert the water intake hose
into the water-inlet entrance
on the control panel.
Add water as necessary.
6
Drain valve parts
1.Remove the cover
(HTW130-186S only)
Figure 1
2.Install the drain hose
Bottom foot
Figure 2
Water intake hose
Water inlet