Installation and adjustment
For your security and to ensure correct operation of the machine, please install and
adjust the machine according to this manual's instructions.
Installation of the lint filter
Place the bottom side of the lint filter into the
overflow filter, then push the top side into the
After installation, please double check to
make sure that the lint filter is installed in the
correct location; otherwise it may fall off
Drain hose usage
Drain hose drainage should be smooth and unobstructed.
1.The height of the drain hose shall be
less than 10cm, or the drainage will
not be smooth enough and cause
2.Do not tramp or press the drain hose.
3.If the drain hose is too long, cut it at mid point.
To make smooth drainage, cut the front end of
the hose slantingly.
4.If extra drain hose is needed, please make
separate purchase. The inner diameter of the
extra hose shall not less than 30mm,and the
length shall not exceed 1.5m.
If the extra hose is too long, cut it either
at point A or B.