Last variable parameter prevents display of instruments downloaded from unused inputs. superseded documentation section of the BEKA website. Fieldbus compliance verified to ITK 6.3 Most of the BA684DF-F display parameters are configured on-site via the fieldbus. Screen format Option added to remove status text from selection and alarm configuration is performed single variable screens.
5.7.5. downloaded from either the Fieldbus Foundation or from the BEKA associates website. If enabled, operating the P and ▲ push buttons simultaneously activates the Quick Access Menu, allowing the user to adjust the display contrast without providing access to any of the other configuration parameters.
3. SYSTEM DESIGN 3.2 Alarm outputs The BA684DF-F FOUNDATION™ fieldbus display The BA684DF-F can be supplied with six alarm may be connected to any fieldbus segment as outputs that may be linked to any of the displayed shown in Fig 2, providing it can provide the variables.
It is suitable for exterior mounting in most industrial environments, including off-shore and waste water treatment installations. Please consult BEKA associates if high vibration is anticipated. The BA684DF-F enclosure is surface mounting. Accessory kits described in sections 7.2 of this manual enable the instrument to be mounted onto a vertical or horizontal pipe.
Page 7
Fig 5 Dimensions and terminal connections...
5. DISPLAY & ALARM CONFIGURATION 5.2 Screen selection and alarm configuration Screen selection and, if fitted, alarm configuration is performed via the four front panel push buttons. 5.1 Display transducer block addition loading BA684DF-F FOUNDATION™ fieldbus display Device All the display and alarm configuration functions Description files onto the system host, the eight are contained in an easy to use menu that is inputs require individual configuration.
5.4 Accessing the instrument configuration menu. Throughout this manual push buttons are shown in italics e.g. P E ▼ ▲ and legends displayed by the instrument are shown within inverted commas e.g. 'Enter Access Code'. Operating the P and E push buttons simultaneously accesses the display configuration menu.
5.5 Screen selection (Display format) The BA684DF-F FOUNDATION™ fieldbus display can display up to eight fieldbus variables that are identified as IN_1 to IN_8. The fieldbus variable that each one represents is determined by the BA684DF-F configuration at the fieldbus system host - see the FOUNDATION fieldbus™...
low or high alarm, or as a combined low and high 5.6 Alarm configuration alarm, either with or without hysteresis. Note: Alarm menus are only included when the BA684DF-F is fitted with optional alarm outputs. Outputs are locally activated from the fieldbus The required functions can be individually enabled variables and are configured via the instrument by positioning the highlight over the Enb/Dis...
5.7 Display configuration 5.7.7 Code Defines the four digit alphanumeric code that must be entered to gain access to the instrument 5.7.1 Settings The backlight brilliance and display contrast are configuration menus. Alpha characters are case adjustable from this sub-menu. sensitive.
5,8 Quick Access Menu The Quick Access Menu allows an operator to adjust the backlight brilliance and the display contrast without having access to the other configuration parameters. The quick access menu is accessed by operating the P and ▲ push buttons simultaneously. If the Quick Access Menu is not protected by an access code the contrast and brilliance controls will be...
BA684DF-F BA684DF-F does That BA684DF-F FOUNDATION™ fieldbus displays are returned to not have correct protocol is same BEKA associates or to our local agent for repair. protocol as fieldbus. i.e. Fieldbus Foundation or Profibus PA. 6.4 Routine maintenance Wrong variable...
40 and 80mm. 7.3 FOUNDATION™ fieldbus Interface Guide The BEKA FOUNDATION™ fieldbus Interface Guide which may be downloaded from the BEKA website at www.beka.co.uk contains configuration information for all BEKA FOUNDATION™ fieldbus...
Need help?
Do you have a question about the FOUNDATION BA684DF-F and is the answer not in the manual?
Questions and answers