Page 1
CDC 200/350 (-SBD)-BSY+ CDC-PC xxxx-T02 Konsolensätze bitte separat bestellen / Please order bracket sets separately / Prière de commander séparément les kits de fixation / Rogamos que pidan los juegos de fijación por separado de Originalbetriebsanleitung ....Seite ..2 Anschluss .
Page 2
Failure to follow all instructions listed below may - Operating voltage 24 V DC result in electric shock, fire and/or serious injury. - Usable for smoke extraction, D+H Euro-SHEV in accordance with DIN EN 12101-2 as well as daily Save all warnings and instructions for future ventilation reference.
Technical Data Type CDC 200/350 -BSY+ CDC 200/350 -SBD -BSY+ Rated voltage 24 V DC, ±15 %, 0,6 A 24 V DC, ±15 %, 0,5 A Chain type Standard chain Side bow chain Nominal pressure 200 N 150 N Nominal locking force approx.
Mounting information The drive set is fully configured ex factory.The drives Mount the drives whilst Slave 1 must be reconfigured using SCS in the event of under zero stress. Slave 2 changes to the ex-factory configuration With that, an even Master 3 (e.g.
Is the group wired correctly? Please refer to the connection diagrams in this regard. You will get 2 years guarantee for all D+H products Adjustment of zero point: from date of verified handing over of the system up to Adjust the zero point.
Page 6
Anschluss / Connection / Raccordement / Conexión Aderbelegung Stecker / Pin Assignment / Brochage des fiches / Asignación de cables Standard / Option / Option / Opción -SGI / Estándar Opción -BRV -SKS / -SA / -SZ GY (BRV) GY (-SGI / SKS / SA / SZ) OG (n.c.) OG (n.c.) PK (+SGI / SKS / SA / SZ)
Page 7
*** Kabel gemäß D+H Kabelverlegetabelle (siehe Gebrauchsanleitung der Zentrale) / Cable according to D+H table for layout of cables (see instructions for use of control panel) / Câble selon le tableau de câblage de D+H (voire fiche technique de la centrale) / Cable conforme a la tabla de cableado D+H (véanse instrucciones de uso de la central)