Electric Oven - Bonnet ADVANCIA STANDARD Manufacturer's Instructions

1.8

ELECTRIC OVEN

Off position
Switch
USE
300
250
Off position
Before it is used for the first time the oven should be heated for an hour or two, this will eliminate any
unpleasant odours associated with new equipment.
If the oven is set to use both elements this may give too much heat from the base, select top element
only for the cooking period.
Should items be overcooked on the outside or undercooked inside the temperature is too high, reduce it
for subsequent batches.
The oven should not be used with the door left open (there is a risk the controls could overheat)
IMPORTANT: The runners can be positioned at various heights within the oven
BUT ONLY ONE LEVEL SHOULD BE USED AT ANY ONE TIME.
Irregular cooking is generally due to too high a temperature setting, reduce this
gradually on the thermostat.
100
150
Turn the knob to the required
setting. The switch lets you
select top or bottom element or
both on together
Page 14
300
250
200
Control light
Switch
BONNET GRANDE CUISINE
Registered office:
Rue des Frères Lumière - Z.I Mitry Compans
77292 MITRY MORY Cedex
3BE390843NU – 01/12
Off position
Thermostat
100
150
Heat settings
300
250
Thermostat
Turn the knob to the required
setting. The thermostat allows
adjustment from 50 to 300° C.
100
150