Mercedes-Benz G-Class Owner's Manual page 74

Replacing bulbs
72
X
Replace and tighten screws ;.
X
Insert the assembled blackout brake lamp
housing into the bumper.
X
Replace and tighten screws :.
X
Check that the installation has been per-
formed correctly.
Convoy marking lighting
6x6 chassis cab with crewcab
Removing the protective bar:
X
At the rear of convoy marking :, unscrew
nuts = anti-clockwise.
X
Remove protective bar ; in the direction
of the arrow.
X
Unscrew screws ?.
X
Remove cover A.
X
Turn the bulb anti-clockwise, applying
slight pressure, and remove it from the bulb
holder.
X
Insert the new bulb into the bulb holder
and, applying slight pressure, turn it clock-
wise until it engages.
X
Position cover A and secure with
screws ?.
X
Position protective bar ; and secure with
nuts =.
Licence plate lighting
Station wagon/panel van
Example: licence plate lighting
X
Switch off the lights.
X
Unscrew screws :.
X
Remove outer cover ;.
X
Unscrew screws =.
X
Remove inner cover ?.
X
Turn the bulb anti-clockwise, applying
slight pressure, and remove it from the bulb
holder.
X
Insert the new bulb into the bulb holder and
turn it clockwise until it engages.