Mercedes-Benz G-Class Owner's Manual page 55

Adjust the height of the head restraints man-
ually.
X
To raise: pull the head restraint up to the
desired height.
X
To lower: push the head restraint down
until it is in the desired position.
Removing and fitting the head
restraints
Example: front head restraints
i
To make it easier to remove and fit head
restraints:
tilt the front seat backrest back slightly.
R
fold the rear seat backrest forwards
R
slightly ( Y page 131).
X
To remove: pull the head restraint up and
out.
X
To fit: insert the head restraints.
i Make sure that you insert the head
restraints facing in the correct direction.
X
Push the head restraint down until you hear
it engage in position.
X
Adjust the height and angle of the head
restraints manually.
Folding the folding seat forward
Example: folding the folding seat forwards
The folding seat has two release handles. The
folding seat can be folded forward from the
rear compartment or from the side.
Front release handle
X
Open the front door.
X
To fold forward: pull release handle ; up
and fold the seat forwards.
X
To fold back: push the seat back until it
audibly engages.
Rear release handle
X
Get into the rear compartment.
X
To fold forward: pull release handle :
down and fold the seat forwards.
X
To fold back: pull the seat back until it
audibly engages.
Switching the seat heating on/off
General notes
The buttons for the front seat heating are
located on the control panel.
The red indicator lamps in the button indicate
the heating level you have selected.
X
Make sure the key is in position 2 in the
ignition lock.
i If the battery voltage is too low, the seat
heating may switch off.
Seats
53
Z