Mercedes-Benz G-Class Owner's Manual page 71

X
Hold lens ; firmly and remove bulb holder
=.
X
Turn bulb ? anti-clockwise, applying slight
pressure, and remove it from bulb holder
=.
X
Insert the new bulb into bulb holder = and,
applying slight pressure, turn it clockwise
until it engages.
X
Insert bulb holder = into lens ;.
X
Fit lens ;.
X
Replace and tighten screws :.
All other vehicles
X
Switch off the lights.
X
Remove bolt :.
X
Pull the indicator lamp out by lens ;.
X
Hold lens ; firmly and remove bulb holder
=.
7 All vehicles except chassis-cab with 12 V electrical system.
X
Pull bulb ? out of bulb holder =.
X
Insert the new bulb into bulb holder =,
applying slight pressure so that it sits
firmly.
X
Insert bulb holder = into lens ;.
X
Fit lens ; with the indicator lamp.
X
Screw in bolt :.
Replacing rear bulbs
Tail lamps
! The blackout tail lamp can only be
replaced at a qualified specialist workshop.
!
When fitting the lens, make sure that the
seal is positioned correctly.
! Do not fasten the screws too tightly. You
could otherwise damage the lens.
Example: station wagon
Replacing bulbs
7
Z
69