Warnings And Suggestions - Ceado E37 Series Manual

28
Never operate without hopper and lid in place.
Make sure that shutter is completely open (to the last click) (see Fig. 5).
Do not let the coffee grinder run long without coffee
beans in the hopper; if this were to happen it would
cause tripping of the motor thermal overload
protection. In that case it is necessary to wait until
the overload protection is reset before starting to
grind coffee again.
For this reason, never leave the pack of coffee
beans sitting in the hopper as this prevents you
seeing how many coffee beans are left.
When the coffee grinder is not to be used during the
time when the business is closed, it should always
be switched off with the main switch.
Put only coffee beans in the hopper, not
ready-ground
substances.
CLEANING
It is important to keep the appliance clean and in good working order to ensure optimum quality of
the products and long life of the appliance.
Always disconnect the plug of the appliance from the power socket before cleaning it.
Clean the motor housing and the tray with a cloth dampened with water or alcohol or with a
spray neutral solution.
Wipe with a dry cloth.
Never put the appliance under running water and never immerse in water.
Once the hopper has been removed it can be washed with lukewarm water and neutral soap,
then rinse it and dry well.
Always clean the discharge opening with the brush provided (Fig. 6).

WARNINGS AND SUGGESTIONS

coffee or other
GB
Fig. 5