Warnings And Suggestions - Ceado E37S Use And Maintenance Manual

GB
Never operate without hopper and lid in place.
Make sure that shutter is completely open (to the last click) (see Fig. 6).
Do not let the coffee grinder run long without coffee
beans in the hopper; if this were to happen it would
cause tripping of the motor thermal overload
protection. In that case it is necessary to wait until
the overload protection is reset before starting to
grind coffee again.
For this reason, never leave the pack of coffee
beans sitting in the hopper as this prevents you
seeing how many coffee beans are left.
When the coffee grinder is not to be used during the
time when the business is closed, it should always
be switched off with the main switch.
Put only coffee beans in the hopper, not
ready-ground
substances.
SAFETY GRID E92
Electronic espresso coffee grinder model E92 is equipped with a removable safety grid (18 Fig. 1).
Before operating the grinder, place the safety grid inside the bean hopper, slotting it into the only
position so that the magnetic sensor (19 Fig. 1) is in contact with the end of the safety arm (20 Fig. 1).
Note: Coffee grinder will not start if safety grid is not properly in place.
Any attempt to by-pass the safety device and use the coffee grinder without its safety
grid in place may cause personal injury and/or damage to the appliance.

WARNINGS AND SUGGESTIONS

coffee or other
31
Fig. 6