Ff - Other Function Blocks Available But Not Used In Default Setting - Val Controls IHP24-A Manual

4.3 FF – Other Function blocks available but not used in default setting.
Discrete Input (DI)
Discrete input function block, used to receive input data of transducer blocks, and transmit it to
other function blocks.
Configuration
If you want to change the digital input just change the CHANNEL register in the DI Block.
Block
DI1
Note: No signals are available on any of the channels.
Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600 • Fax +45 7547 0611
DHP-UM-013
Revision: 4
Signal in OUT_D Values:
Device
vc@valcontrols.com • www.valcontrols.com
Status
12/58