(Optional) Welding the Low
7.5
Temperature Component Pipes
To outdoor unit gas pipe
To indoor unit
liquid pipe
8
Connecting Water Pipes
8.1
(Optional) Connecting the Humidifier Water Inlet Pipe
Top pipe routing
Bottom pipe routing
To outdoor
unit liquid pipe
To indoor unit gas pipe
1. Clean the water inlet engineering pipes to avoid impurities
entering into the humidifier.
2. When routing pipes from the top, do not route the pipes
over servers or other devices to protect them from being
affected by pipe leaks.
3. Wrap each part of the pipes with thermal insulation foam.
4. Use supports to secure pipes.
Connection method
(1) Reserved connector
(2) Rigid pipe conversion
adapter
(3) Rigid pipe
(4) Pagoda connector
(5) Hose clamp
(6) Hose
Welding the Water Cooling
7.6
Module
5/8 inch
liquid pipe
10
7/8 inch
gas pipe
(7) Reserved connector
(8) Active connector
(9) Rigid pipe
(10) Elbow
(11) Rigid pipe