Advertisement
A SS E MB LY I NS T R U CTI O NS:
11
Place the pump body O-ring (12719A) around the outside flange
of the rear bracket. The O-ring may be sparingly lubricated with
silicone to ease installation of the pump body in the next step.
BANJO CORPORATION
A Unit of IDEX Corporation
150 Banjo Drive
Crawfordsville, IN 47933 U.S.A.
Telephone: (765) 362-7367
Tech Sales: (888) 705-7020
Fax: (765) 362-0744
banjocorp.com
#yellowhandle
Please see banjocorp.com for more information
12
Install the pump body (12712/13712) as shown below with the
outlet flange facing up. Install the 10 body screws (12720), 10 lock
washers (V07018), and 10 nuts (V07019) to secure the pump body
to the rear bracket. Tighten the bolts securely all the way around.
© Copyright 2018 Banjo Corporation. All Rights Reserved.
BJO_MAN_KK-52_1.5_2_3InchPolyPumpManual_Rev1118
Advertisement
