Alert-it Companion mini pro Manual page 9

Reset Button
The Reset button is designed so the carer can reset the call on the pager
once they have attended to the monitors seizure alarms.
Alert-iT advise that the Reset button is located as near to the user of the
Companion mini as possible and is fixed in location using screws (not
supplied) or the sticky pad (supplied).
When the Reset button is pressed, the call from the companion mini will
cancel instantly from all pagers; Please note, if Companion Mini is still
detecting abnormal movement it will resend its alarm call and the pagers
will re-alarm.
The reset button is powered by 2x AAA batteries and should be replaced
at the same time as the Companion mini, see maintenance instructions on
page 11.
Fitting of Reset Button
Suggested placement of supplied sticky pads are shown in the photos
above. The tabs can be tucked inside the case before fastening the back
into place. This will stop the tabs from protruding out of the sides once
fitted into position.