Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Alert-it Companion mini pro
Summary of Contents for Alert-it Companion mini pro
- Page 1 mini pro Wireless Epilepsy Support...
- Page 2 If you have any questions or require assistance with regards to the Com- panion mini pro or any other Alert-iT product, our experienced team are on hand to help. Please find contact details below. Don't forget you can also join us on Facebook, Twitter and LinkedIn where you’ll find even more...
-
Page 3: Table Of Contents
Device Installation Turning on the Companion mini (Monitor) Turning on the Pager (Supplied Separately) Pairing Instructions Positioning the Companion Mini Pro Maintenance Instructions How to clean the Devices Changing Batteries in the Mini or Reset Button Routine Testing Sheet (as seen on Page 11) -
Page 4: Product Information
● Partial ● Generalised The carer is then alerted via the Alert-iT Safelink Radio System. This Quick Starts relates to the use of the Companion Mini Pro when using an Alert-iT Professional Pager (P137 supplied separately). Companion Mini Pro Features Key features of the companion mini sensor includes: ●... -
Page 5: In The Box
In The Box 1x P176 Companion Mini (Monitor) + 2x Spare AAA (LR03) Batteries 1x P176B Reset Button+ 2x Spare AAA (LR03) Batteries 2x Cable ties & Velcro Pads for fitting of the companion mini 2x Sticky Pads for fitting of the Reset button 1x USB Stick containing;... -
Page 6: Device Installation
Device Installation Turning on the Companion mini (Monitor) The monitor (companion mini) is shipped in a low power state and needs waking up before use. The monitor is woken up by pressing the recessed “Test” button on the front of the monitor [Figure 1], typically using a pen tip. -
Page 7: Turning On The Pager (Supplied Separately)
Turning on the Pager (Supplied Separately) Please note: While the pager is shipped with some charge in the batteries, it is recommended that the pager is charged fully before use. For full details about this pager see “UQ1043 P137 Pager Quick Start”. To TURN ON the Pager, press and hold the “ON/OFF &... -
Page 8: Pairing Instructions
Pager Charging The pager’s battery should last approximately 3 days depending on how many alarm cycles it goes through during this period. When the pager’s battery starts to get low it will indicate less than 10% charging remaining. When nearly exhausted it will indicate immediate charging is needed and an intermittent audible alarm will start. - Page 9 The Reset button is designed so the carer can reset the call on the pager once they have attended to the monitors seizure alarms. Alert-iT advise that the Reset button is located as near to the user of the Companion mini as possible and is fixed in location using screws (not supplied) or the sticky pad (supplied).
-
Page 10: Positioning The Companion Mini Pro
3 and 4. If required, the base can be screwed to the bed through the holes in the base (screws not provided) Please contact Alert-iT customer support for more information if assist- ance is needed. Figure 3. -
Page 11: Maintenance Instructions
Maintenance Instructions It is highly recommended to test the system weekly by stimulating spasm movements on the bed for 15 seconds (the default time unless changed by a user via programming) & ensure the alarm call is sent to the pager. To help keep a record of testing, we have provided a test logging sheet on page 12, please write the serial number in the space provided. -
Page 12: Routine Testing Sheet (As Seen On Page 11)
Routine Testing Sheet (as seen on Page 11) Serial Number: ……………………………………………………….……….….…………… Test Signature Date... -
Page 13: Reset Button Specification
Reset Button Specification Connections: B-Micro USB 2.0 Weight: Material: White ABS Anti-microbial Dimensions (mm): 100 x 45 x 15 (HxWxD) Batteries: 2x AAA (LR03) Non-rechargeable Battery Life: 3 years Operating Temp: 5-35ºC Humidity: 90% max. Non-condensing Radio Frequency: 434.075Mhz @ 10mW Companion Mini Specification Connections: B-Micro USB 2.0... - Page 14 For 3 years from the date of purchase of the initial equipment, Alert-iT will offer you; • Access to support between the hours of 9.00am and 5.00pm each week- day (excluding Public Holidays) via the telephone helpline for the purpos- es of fault diagnosis and the provision of advice.
- Page 15 The system complies with 93/42/EEC as a Class 1 Medical Device for use in a Home Healthcare environment. The system complies with EN60601 for Class 2 Electrical Safety and does not need a protective earth and group 1 Class B EMC in a Home Healthcare environment.
- Page 16 Alert-iT Care Alarms Fernie House (unit 3) Coalville Business Park Jackson Street Leicester LE67 3NR +44 (0) 1530 239 900 www.alert-it.co.uk www.facebook.com/AlertitCareAlarms/ or join our supportive Epilepsy Forum UH1462B Companion mini Pro Handbook...
Need help?
Do you have a question about the Companion mini pro and is the answer not in the manual?
Questions and answers