Pairing Instructions - Alert-it Companion mini pro Manual

Pager Charging
The pager's battery should last approximately 3 days depending on how
many alarm cycles it goes through during this period.
When the pager's battery starts to get low it will indicate less than 10%
charging remaining. When nearly exhausted it will indicate immediate
charging is needed and an intermittent audible alarm will start.
Charge for at least 12 hours.

Pairing Instructions

Ensure the monitor is turned on.
Set the pager into Auto-Add mode. This is done by pressing the menu
button for 3 seconds to enter the "setup & edit" menu.
Scroll right using the right arrow until a password is asked for ( )
and enter the password "1900" by using the up/down buttons to change
the selected number and the right key to select the next digit. The left key
is used to accept and confirm the entered password.
Now scroll right to "AutoAdd" and select with the up key, then the left key
to confirm. Within 10 seconds the pager should bleep and drop out of
auto-add, offering a default name for the monitor, which is edited in the
same way as the password, this time letters & blank are also available for
the name.