Page 1
OPERATION AND PARTS MANUAL MODELS ST2037F ST2040TF SUBMERSIBLE PUMP WITH FLOAT SWITCH Revision #3 (12/14/17) www.discount-equipment.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
Page 2
One of our experienced staff members will get back to you with a quote for the right part that your machine needs. We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mayco, Toro/Stone, Diamond Products, Magnum, Airman, Mustang, Power Blanket, Nifty Lift, Atlas Copco,...
ST2040TF Pump Assembly ......24-25 Terms And Conditions Of Sale — Parts ....26 NOTICE Specifications and part numbers are subject to change without notice. PAGE 2 — ST2037F/2040TF SUBMERSIBLE PUMP • OPERATION AND PARTS MANUAL — REV. #3 (12/14/17)
COULD result in DEATH or SERIOUS INJURY. CAUTION Indicates a hazardous situation which, if not avoided, COULD result in MINOR or MODERATE INJURY. NOTICE Addresses practices not related to personal injury. PAGE 4 — ST2037F/2040TF SUBMERSIBLE PUMP • OPERATION AND PARTS MANUAL — REV. #3 (12/14/17)
Page 5
No one other than the operator is to be in the working area when the equipment is in operation. DO NOT use the equipment for any purpose other than its intended purposes or applications. ST2037F/2040TF SUBMERSIBLE PUMP • OPERATION AND PARTS MANUAL — REV. #3 (12/14/17) — PAGE 5...
Page 6
PAGE 6 — ST2037F/2040TF SUBMERSIBLE PUMP • OPERATION AND PARTS MANUAL — REV. #3 (12/14/17)
Page 7
Recyclers and manufacturers alike promote the process of recycling metal. Using a metal recycling center promotes energy cost savings. ST2037F/2040TF SUBMERSIBLE PUMP • OPERATION AND PARTS MANUAL — REV. #3 (12/14/17) — PAGE 7...
Mechanical Seal Oil — Use a good grade 10 weight non-detergent hydraulic oil (i.e. Shell Turbo 32 or equivalent). Fill oil cavity 75% to 85% full (allow air space for expansion). PAGE 8 — ST2037F/2040TF SUBMERSIBLE PUMP • OPERATION AND PARTS MANUAL — REV. #3 (12/14/17)
DO NOT install the pump directly into an area where there Electrical Code, ANSI/NFPA 70. is a heavy buildup of mud, grit, silt, or debris. if this condition PAGE 10 — ST2037F/2040TF SUBMERSIBLE PUMP • OPERATION AND PARTS MANUAL — REV. #3 (12/14/17)
Always check the cable for signs of wear NEVER use a defective power cable. Replace the cable immediately if the cable is worn or defective. ST2037F/2040TF SUBMERSIBLE PUMP • OPERATION AND PARTS MANUAL — REV. #3 (12/14/17) — PAGE 11...
Remember to attain possibly death! maximum pumping capacity and prevent excessive wear, position the pump so it will not burrow itself into sand or clay. PAGE 14 — ST2037F/2040TF SUBMERSIBLE PUMP • OPERATION AND PARTS MANUAL — REV. #3 (12/14/17)
Loose Oil Fill Plug? Tighten securely. Check that the movement of the fl oat switch is Pump Fails to Stop Malfunction in Float Switch? not obstructed. PAGE 18 — ST2037F/2040TF SUBMERSIBLE PUMP • OPERATION AND PARTS MANUAL — REV. #3 (12/14/17)
“Remarks” Column. assembly/kit that can be purchased, or is not available for sale through Multiquip. PAGE 20 — ST2037F/2040TF SUBMERSIBLE PUMP • OPERATION AND PARTS MANUAL — REV. #3 (12/14/17)
1....020S500UL060 ..... MECHANICAL SEAL 1....0202005T024 ....PACKING NOTICE Part numbers on this Suggested Spare Parts list may supersede/replace the part numbers shown in the following parts lists. ST2037F/2040TF SUBMERSIBLE PUMP • OPERATION AND PARTS MANUAL — REV. #3 (12/14/17) — PAGE 21...
Page 25
One of our experienced staff members will get back to you with a quote for the right part that your machine needs. We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mayco, Toro/Stone, Diamond Products, Magnum, Airman, Mustang, Power Blanket, Nifty Lift, Atlas Copco,...
Need help?
Do you have a question about the ST2037F and is the answer not in the manual?
Questions and answers