Page 1
OperatiOn and parts Manual MOdel ss233 subMersible puMp Revision #2 (03/22/10) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES. pn: 020954...
Explanation Of Code In Remarks Column .... 14 Pump Assy............16-17 Terms And Conditions Of Sale — Parts ....18 NOTICE Specifications and part numbers are subject to change without notice. page 2 — SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10)
All orders are treated as Standard Orders and will ship the same day if received prior to 3PM PST. We aCCepT all maJor CrediT CardS! SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10) — page 3...
Could result in deaTH or SeriouS inJurY. CauTion Indicates a hazardous situation which, if not avoided, Could result in minor or moderaTe inJurY. NOTICE Addresses practices not related to personal injury. page 4 — SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10)
Page 5
No one other than the operator is to be in the working area when the equipment is in operation. do noT use the equipment for any purpose other than its intended purposes or applications. SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10) — page 5...
Page 6
Application of heat in this manner may heat the oil in the seal cavity above the critical point, causing pump damage. page 6 — SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10)
Page 7
Severe injury or death by electrocution can result from operating an ungrounded motor. never use gas piping as an electrical ground. SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10) — page 7...
(CCW) as viewed from the impeller end of the pump. NOTICE Pumps with the "CSA" mark are tested to UL standard UL778 and certified to CSA standard C22.2 N0. 108. page 8 — SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10)
This pump uses metric threads. do noT use english measurement threads. never use this submersible pump to pump flammable liquids or operate in a explosive or flammable environment. SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10) — page 9...
The motor will automatically restart once the temperature returns to an acceptable operating temperature. page 10 — SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10)
3. After the pump has been positioned correctly into place, power can be applied to the pump's electric motor. Figure 2. Submersible Pump Upright Position (Correct) SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10) — page 11...
GFCI possibility of electric shock, make certain that pump RECEPTACLE is connected only to a properly grounded receptacle. 3-PRONG PLUG Figure 5. Connecting the Power page 12 — SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10)
150 ft. 100 ft. 1800 150 ft. 100 ft. 65 ft. 2400 125 ft. 75 ft. 50 ft. CAUTION: Equipment damage can result from low voltage. SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10) — page 13...
Multiquip. Other entries will for sale through Multiquip. be clarifi ed in the “Remarks” Column. page 14 — SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10)
Page 15
SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10) — page 15...
Need help?
Do you have a question about the SS233 and is the answer not in the manual?
Questions and answers