Related Manuals for Clarke Weld AT100
Summary of Contents for Clarke Weld AT100
- Page 1 PRESSURE REGULATOR For use with models AT100,130,131 & 150 Part No: 8134140 OPERATING & MAINTENANCE INSTRUCTIONS GC0509...
-
Page 2: Environmental Protection
INTRODUCTION Thank you for purchasing this CLARKE Pressure Regulator. Before attempting to use the product, it is essential that you read this manual thoroughly and carefully follow all instructions given. In doing so you will ensure the safety of yourself and that of others around you, and you can also look forward to the product giving you long and satisfactory service. -
Page 3: General Safety Precautions
GENERAL SAFETY PRECAUTIONS IMPORTANT! In addition to the following precautions, you should read, and fully comply with, all instructions and safety precautions that were supplied with your Welder. Please keep these instructions in a safe place for future reference. 1. Incorrect use of the pressure regulator can cause serious damage or injury. -
Page 4: Shutting Down
INSTRUCTIONS FOR USE OPENING THE PRESSURE VALVE 1. Check to ensure the regulator is completely closed (turn the pressure adjuster knob (4) fully anticlockwise). WARNING: OPENING THE CYLINDER VALVE TOO QUICKLY MAY CAUSE THE GAUGE TO MALFUNCTION. 2. Turn the pressure adjuster (4) very slowly clockwise. The pressure gauge (3) will indicate the outlet pressure. -
Page 5: Maintenance
MAINTENANCE Do not attempt to carry out maintenance or repairs yourself. • Do not dismantle the regulator. Return it to your Clarke dealer for servicing. • Do not clean gauge lens with solvents/petrol etc. MALFUNCTIONS Do not use the pressure regulator if: •... -
Page 6: Parts List And Diagram
PARTS LIST & DIAGRAM Part No Cylinder Valve (not included) Inlet Connection Pressure Gauge OTIR3001 Adjuster Knob OTIR3002 Outlet Connection OTIR3003 Regulator Body Gauge Lens OTIR3004 Safety Relief Valve OTIR3005... -
Page 7: Technical Specification
PARTS & SERVICING For parts & Servicing, please contact your nearest dealer, or CLARKE International, on one of the following numbers. PARTS & SERVICE TEL: 020 8988 7400 PARTS & SERVICE FAX: 020 8558 3622 e-mail as follows: PARTS: Parts@clarkeinternational.com...