Related Manuals for Clarke CAT189
Summary of Contents for Clarke CAT189
- Page 1 AIRLINE REGULATOR MODEL NO: CAT189 PART NO: 31205506 OPERATING & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0619 - ISS 1...
-
Page 2: Specifications
Your regulator has been designed to give long and trouble free service. If, however, having followed the instructions in this booklet carefully, you encounter problems, take the unit to your local CLARKE dealer. SPECIFICATIONS CAT189... - Page 3 3. Keep children and visitors away - do not let children handle the tools. 4. Do not operate air tools where there are flammable liquids or gases. USE OF AIRLINE EQUIPMENT 1. Stay alert and use common sense - do not operate an air tool when you are tired or under the influence of alcohol, drugs or medication.
-
Page 4: Installation
5. A typical air line layout is shown above. If an automatic in-line filter/ regulator is used it will keep the tool in good condition. The lubricator should be adjusted to approx 2 drops per minute and SAE 10 oil should be used. -
Page 5: Operation
6. Install a pressure gauge to either of the gauge ports facing the operator. The other gauge port should be plugged or can be used as an additional air outlet for regulated air. 7. It is recommended that an air line filter should be installed upstream of the regulator. - Page 6 ACCESSORIES A wide range of accessories is available including filter/regulators, lubricators, high-pressure hoses (5 to 50 metres) etc. Contact your CLARKE dealer for further information or CLARKE International Service Department. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
-
Page 7: Component Parts
COMPONENT PARTS Description No Description T-handle kit Diaphragm Wall bracket & panel nut Valve assembly Panel nut Bottom plug assembly Universal wall bracket Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...