Universal (Aluminum)
Platform Installation
Thermo Scientific
1. Place the instrument on a level and firm surface; it must be capable
of supporting the weight and load of the instrument, and the impact
force generated by the motion. Prepare related parts (see Figure 1-1).
1) M4x10 cross recessed countersink head screws
2) Universal (aluminum) platform
3) Main body of CO2 resistant shaker
Figure 1-1. Universal Platform Installation Diagram
2. Install the horizontal universal platform on the fixed plate of the Main
body, ensure all four mounting holes in the universal platform and the
four threaded mounting holes are in alignment
3. Fasten the universal platform and the fixed plate with four M4x10
cross recessed countersink head screws.
Section 1
Unpacking and Installation
CO2 Resistant Shaker
1-3