Thermo Scientific
Application
Section 4
Application on Lab Benches
To operate the shaker outside of a CO2 incubator, refer to Specifications
in Section 2.
Application in CO2 Incubator
Place the main body of the shaker in the CO2 incubator, and use the
signal cable to connect the control box through the access port of the CO2
incubator. Refer to Figure 4-1.
1) CO2 Incubator
2) Control Box
3) Power Cord
4) Main body of CO2 Resistant Shaker
Figure 4-1. Application in CO2 incubator
CO2 Resistant Shaker
4-1