Storage - Geosense IPI-V-1 Instruction Manual

V1.0 September 2017
(Continued from page 9)

4.4 Storage

All equipment should be stored in an environment that is protected from direct
sunlight. It is recommended that cables be stored in a dry environment to prevent
moisture migrating along inside them in the event of prolonged submersion of
exposed conductors.
Storage areas should be free from rodents as they have been known to damage
connecting cables.
No other special requirements are needed for medium or long-term storage although
temperature limits should be considered when storing or transporting associated
components, such as readout equipment.
Calibration Sheets contain VITAL information about the IPI's
We suggest that only COPIES of calibration certificates should
The original certificates should be stored safely
be taken to site
10