Advertisement
Quick Links
Observer 70
Observer 70 white
0831 02
Observer 70 anthr.
0831 10
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
Danger of electric shock. Always disconnect before carrying out work on the devise or
load. At the same time, take into account all circuit breakers that supply dangerous
voltage to the device or load.
Do not press on the sensor window. Device can be damaged.
The device is not suitable for use as a burglar alarm or other alarm.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
(1) Sensor window
(2) Rear device panel
(3) Central screw
3 Function
Intended use
-
Automatic switching of lighting depending on the heat motion and ambient brightness.
-
Surface-mounting in indoor and outdoor areas
Product characteristics
-
Variable installation position
-
Protected against spray water
82523522
1
19.05.2011
1/8
Advertisement
Related Manuals for Gira Observer 70
Summary of Contents for Gira Observer 70
- Page 1 Observer 70 Observer 70 white 0831 02 Observer 70 anthr. 0831 10 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure to observe the instructions may cause damage to the device and result in fire and other hazards.
-
Page 2: Operation
Observer 70 Follow-up time and brightness value settable Test operation for checking the detection area Range can be set in three levels Parallel connection of multiple motion detectors possible Manual switch-on possible with installation button, NC contact Automatic operation The controller detects heat motions of people, animals and objects. - Page 3 Observer 70 Heat radiation too high. Destruction of the sensors. Align the device so that no direct sunshine hits the sensor window. Do not place the device in the sun. 3: Installation laterally to the direction of movement Selecting the installation location At an installation height of 2.4 m ( 2), the optimum range of the motion detector is achieved...
- Page 4 Observer 70 4: Rear housing panel and installation frame i To prevent the ingress of moisture, we recommend inserting the cables from below (10). When the cables enter below, use an installation frame (9). Insert the rear housing panel (7) into the installation frame.
- Page 5 Observer 70 6: Setting the range Set the required follow-up time using the adjuster (11). Set the required brightness threshold with the adjuster (12). The 3 icon stands for Day mode, i.e. switching independent of brightness, and the 2 icon for minimum brightness.
- Page 6 Observer 70 8: Motion detector connection diagram Connect controller and optional installation button T, NC contact, according to connection diagram ( 8). If multiple motion detectors are to switch a shared load, connect the motion detectors in parallel. i Parallel switching of multiple motion detectors does not increase maximum connected load.
-
Page 7: Warranty
The warranty is provided in accordance with statutory requirements via the specialist trade. Please submit or send faulty devices postage paid together with an error description to your responsible salesperson (specialist trade/installation company/electrical specialist trade). They will forward the devices to the Gira Service Center. 82523522 19.05.2011... - Page 8 Observer 70 Gira Giersiepen GmbH & Co. KG Elektro-Installations- Systeme Industriegebiet Mermbach Dahlienstraße 42477 Radevormwald Postfach 12 20 42461 Radevormwald Deutschland Tel +49(0)21 95 - 602-0 Fax +49(0)21 95 - 602-399 www.gira.de info@gira.de 82523522 19.05.2011...