Weider WESY96310 User Manual page 16

32. Wrap the Military Press Cable (72) around a
3 1/2" Pulley (15). Attach the Pulley to the Top
Frame (55) with a 3/8" x 2" Bolt (12) and a 3/8"
Nylon Locknut (21).
See the inset drawing. Wrap the Military Press
Cable (72) around a 3 1/2" Pulley (15). Attach the
Pulley and a Cable Trap (66) to the bracket on
the Stabilizer (5) with a 3/8" x 2" Bolt (12) and a
3/8" Nylon Locknut (21). Be sure that the Cable
Trap is turned to hold the Cable in place.
33. Wrap the Military Press Cable (72) around a
3 1/2" Pulley (15). Attach the Pulley and a Cable
Trap (66) to the Pivot Arm (101) with the 3/8" x
3 3/4" Bolt (88), a 3/8" Washer (9), and a 3/8"
Nylon Locknut (21). Be sure that the Nylon
Locknut is on the side shown and that the
Cable Trap is positioned to hold the Cable in
place.
32
55
15
21
33
66
88 15
16
12
72
12
Bracket
66
15
5
9
101
72
21
72
21