Pyronix ATLAS 4 Installation Instructions Manual page 16

10.4 Setting the Panel when Mains Fails
10.5 Programming Set Modes.
NOTE: The Atlas 4 uses the same software to control the panel as the Atlas 8, therefore any programming of zones will show
all 8 zones, however only the first 4 are available for use.
Entry / Exit Access
personnal attack
NOTE: On pressing
zone programming.
10.6 Setting the Alarm Bell Time
10.7 Setting Entry Time
10.8 Setting Exit Time
10.9 Changing the Engineer Code
immediate omit momentary key
24 hour fire
after selecting the attribute for zone 4, a further four zones must be scrolled through to exit the
latched key tamper