GB
DIP switch
The DIP switch on the accessory card must be set as
follows.
16
S2
Activating DEH 310
Activating DEH 310 can be performed via the start
guide or directly in the menu system.
Start guide
The start guide appears upon first start-up after install-
ation, but is also found in menu 5.7.
Menu system
If you do not activate DEH 310 via the start guide, this
can be done in the menu system.
Menu 5.2 - system settings
Activating/deactivating of accessories.
Menu 5.3.7 - external addition
Adjust settings for external additional heat here.
Caution
Also see the Installer manual for VVM 310.