34. Wrap the Military Press Cable (72) around a
"V"-Pulley (50). Attach the "V"-Pulley to the
Top Frame (55) with a 3/8" x 2 1/2" Bolt (86)
and a 3/8" Nylon Locknut (21).
Wrap the Military Press Cable (72) around a
3 1/2" Pulley (15). Attach the Pulley to the
indicated bracket on the Assist Arm (105) with
a 3/8" x 1 3/4" Bolt (76) and a 3/8" Nylon
Locknut (21). Be sure that the Cable is
between the Pulley and the Assist Arm and
that the Cable and Pulley move smoothly.
35. Wrap the Military Press Cable (72) around a
"V"-Pulley (50). Attach the "V"-Pulley and a
Long Cable Trap (31) to the Assist Upright
(74) with a 3/8" x 4 1/2" Bolt (112), a 3/8" Flat
Washer (9), and a 3/8" Nylon Locknut (21).
Be sure that the Long Cable Trap is turned
to hold the Cable in place and that the
Cable is routed around the Pulley as
shown.
Wrap the Military Press Cable (72) around a
3 1/2" Pulley (15). Attach the Pulley to the
other bracket on the Assist Arm (105) with a
3/8" x 1 3/4" Bolt (76) and a 3/8" Nylon
Locknut (21). Be sure that the Cable is
between the Pulley and the Assist Arm and
that the Cable and Pulley move smoothly.
34
76
15
Bracket
105
35
9
112
105
Bracket
16
55
50
21
86
72
21
74
21
31
50
21
72
76
15