Main Memory; Equipping Rules - Fujitsu PRIMERGY TX150 S4 Options Manual

Hide thumbs Also See for PRIMERGY TX150 S4:
Table of Contents

Advertisement

5

Main memory

V
CAUTION!
Observe the safety instructions in the
et seqq..
The system board supports up to 8Gbytes of main memory. Four slots (2 slots
form a memory bank) are provided for the main memory. Each memory bank
can be equipped with 512 Mbyte, 1 Gbyte or 2 Gbyte unbuffered DDR 2 memory
modules.
5.1

Equipping rules

Figure 11: Structure of the main memory in memory banks and memory modules
– Each memory bank is equipped with two memory modules with the same
capacity. Memory access takes place in 2-way interleaved mode.
– The memory module capacity can differ for the various memory banks: e.g.
memory bank 2A/2B can be equipped with two 512 Mbyte memory modules,
and memory bank 1A/1B with two 1 Gbyte memory modules.
U41629-J-Z156-2-76
chapter "Safety notes" on page 13
DIMM 1A
DIMM 2A
DIMM 1B
DIMM 2B
Options Guide
27

Advertisement

Table of Contents
loading

Table of Contents