Fujitsu PRIMERGY TX150 S4 Options Manual page 62

Converting from the floorstand model to the rack model
The right-hand side cover and the top cover build one part.
Figure 41: Removing the screws
Ê Remove the two screws at the rear side.
1
Figure 42: Removing the right-hand side cover
Ê Lift the hook up slightly using a screwdriver.
Ê Push the right-hand side cover in the direction of the arrow.
Ê Lift off the right-hand side cover.
I
The right-hand side cover is no longer required.
62 Options Guide
U41629-J-Z156-2-76