Table of Contents
Advertisement
Rack model
The following steps can then be carried out by one person only.
Ê Release the locking mechanism of both rails (4a + 4b) and insert the server
completely into the rack (5).
Figure 53: Fastening the server in the rack cabinet
Ê Place the cage nuts for fastening the front panel in the corresponding holes
of the front support uprights and fasten the server using four knurled screws.
Ê Route the cables with the inserted server as described in the Technical
Manual of the corresponding Rack.
To remove the server, follow the same procedure in the reverse order.
74
Options Guide
Completion
U41629-J-Z156-2-76
Advertisement
Table of Contents
