Fitting The 7020A Digital Postioner - Baelz Automatic BA 375-E42 Operating Instructions Manual

Motorized Rotary Actuator

6.3 Fitting the 7020A digital postioner

Disconnect actuator from power supply before starting work!
Danger
1. Remove the two screws indicated below.
2. Replace the screws with the spacer bolts
spacer bolt
M4 x 38 mm
washer 1.6mm
(only without
additional travel
switches)
spacer bolt
M4 x 22 mm
(only without
additional travel
switches)
3. Place the adaptor panel onto the spacer bolts and the capacitor bracket and fix with
the metal countersunk screws. IMPORTANT NOTE: The holes in the adaptor panel are
not symmetrical; the outermost hole is at the top left (see right-hand photo below). The
bottom right-hand hole remains unused.
W. Baelz & Sohn GmbH & Co. · Koepffstrasse 5 · 74076 Heilbronn · Germany · www.baelz.de
baelz 375-E42
spacer bolt
M4 x 85 mm
Seite | Page 15 | 32