Technical Data - Zanussi ZFP18200WA User Manual

Hide thumbs Also See for ZFP18200WA:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 12
If the malfunction shows again, contact the
Service Centre.
These data are necessary to help you quickly
and correctly. Write the necessary data here,
refer to the rating plate.

Technical Data

For further technical information please refer to
the rating on the internal left side of the appli-
ance and in the energy label.
Installation
Read the Safety information carefully for
your safety and correct operation of the
appliance before installation.
Positioning
Install this appliance at a location where the
ambient temperature corresponds to the climate
class indicated on the rating plate of the appli-
ance:
Climate Class
SN
N
ST
T
Location
The appliance should be installed well away from
sources of heat such as radiators, boilers, direct
sunlight etc. Ensure that air can circulate freely
around the back of the cabinet. To ensure best
performance, if the appliance is positioned below
an overhanging wall unit, the minimum distance
between the top of the cabinet and the wall unit
must be as least 100 mm. Ideally, however, the
www.zanussi.com
Zanussi-922717023.indd 19
Ambient
Temperature
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
Model description
(Mod.)
Product number
(PNC)
Serial number
(S.N.)
Dimensions
Height
Width
Depth
Rising Time
appliance should not be positioned below over-
hanging wall units. Accurate levelling is ensured
by one or more adjustable feet at the base of the
cabinet.
Warning! It must be possible to discon-
nect the appliance from the mains power
supply; the plug must therefore be easily
accessible after installation
Electrical connection
Before plugging in, ensure that the voltage and
frequency shown on the rating plate correspond
to your domestic power supply. The appliance
must be earthed. The power supply cable plug
is provided with a contact for this purpose. If the
domestic power supply socket is not earthed,
connect the appliance to a separate earth in
compliance with current regulations, consulting a
qualified electrician.
The manufacturer declines all responsibility if the
above safety precautions are not observed. This
appliance complies with the E.E.C. Directives.
1440mm
554mm
570mm
10 hodin
19
EN
2015-12-11 13:52:35

Advertisement

Table of Contents
loading

Table of Contents