Table of Contents
Advertisement
2
Safety
2.1
Disclaimer
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired. Opening the device invalidates all warranty claims. Before operating the
‑
‑
B
WIC and B
SMC, read the safety instructions in this document carefully. If you do not understand
some safety rules, contact OMICRON Lab before proceeding.
2.2
Safety Instructions
► The B
‑
WIC and B
known as protection class III equipment.
► Only use the B
voltages or currents.
2.3
Designated Use
‑
‑
B
WIC and B
SMC have been especially designed to measure the impedance of passive components in
conjunction with the Bode 100 in laboratory or manufacturing environments.
2.4
Operator Qualification
‑
Testing with B
WIC and B
Personnel receiving training, instructions, directions, or education on B
constant supervision of an experienced operator while working with the equipment. Testing with B
‑
and B
SMC must comply with the internal safety instructions as well as additional relevant documents.
2.5
Cleaning
‑
To clean the B
WIC and B
ensure that all connections to the B
1
Device Under Test
OMICRON Lab
‑
SMC are SELV (Safety Extra Low Voltage according to IEC 60950) devices, also
‑
‑
WIC and B
SMC in conjunction with the Bode 100. Do not apply any external
‑
SMC must only be carried out by qualified, skilled and authorized personnel.
‑
SMC, use a cloth dampened with isopropanol alcohol. Prior to cleaning, always
‑
WIC and B
‑
1
SMC and DUT
are disconnected.
‑
‑
WIC and B
SMC must be under
Safety
‑
WIC
5
Advertisement
Table of Contents
