Roland MC-505 Replacement Manual page 8

Roland MC-505 LCD Replacement Guide
Fig. 11 - Using an Exacto Knife to remove LCD cover
Step 4:
Now you need to remove the LCD cover from the front of the case in order
to access the screws which hold in the bad LCD screen.
The method I use to remove the LCD cover is to use an Exacto knife and
first slowly and carefully pry up one of the top corners of the cover. I then
continue to slide the sharp edge along the top of the cover prying it up.
You may also find that using one of the flat head mini screw drivers to also
be helpful in the process.
Just remember to take your time.
8
produced by: glitchscience.com
2012©