Roland MC-505 Replacement Manual page 18

Roland MC-505 LCD Replacement Guide
Fig. 24 - Setting the LCD contrast
Step 10:
Now that the installation is finished there is one last step and that is to set
the LCD contrast.
To do this power up the MC-505. Once it is fully powered up you will need
to hold down the shift button and press keyboard key 10. The screen
should look similar to that shown in Fig. 24 above. Use the rotary dial to
adjust the contrast to your liking and press enter then you are finished.
Congrats! Enjoy your new fully functional LCD screen and the ability to
actually be able to read the screen and use the MC-505 to its full potential.
18
produced by: glitchscience.com
2012©