Roland MC-505 Replacement Manual page 17

Lcd replacement

Hide thumbs Also See for MC-505:

Roland MC-505 LCD Replacement Guide

Fig. 23 - LCD cover with new double back tape applied

Step 9:

Now that the new LCD is screwed in place, I suggest hooking the main

board back up and doing a quick test of the LCD before closing everything

up and putting the LCD cover back in place. Also, make sure everything

looks correct alignment wise maybe even place the LCD cover on without

having the new double sided tape exposed, just to double check how things

look and if the LCD is correctly installed.

Be careful and cautious when working with the machine plugged in and

having live voltage running. There is the obvious potential of danger, death,

shock, destruction, fire, volcanoes, etc.

If you haven't done so already cut and place some strips of double sided

tape on each of the corners of the LCD cover as shown in Fig. 23. Then

expose the tape and align the LCD cover properly and secure it back into

its original position.

Put everything back together and close it all up.

produced by: glitchscience.com

2012©