Record / Channel; Alarm Menu; Alarm / Motion - Bascom CLIENT User Manual

Record / Record
Choose the recording quality. If you choose Dualstream, the system will
If this option is enabled, the system starts recording a few seconds before
an alarm event (motion detection for example) occurs. Use this option if
your primary recording type is motion or I/O alarm based

Record / Channel

Select the image resolution by mainstream or substream
Time interval to capture an image in normal recording
Time interval to capture an image when motion or IO alarm is triggered
Enable or disable automatic capture function

Alarm menu

Alarm / Motion

The system can use its internal buzzer to emit an alarm tone. You can set the buzzer
How many seconds the system starts recording before an event occurs
How many seconds the system stops recording after an event occurs
Display the alarm icon on the screen when motion is detected
When motion is detected, the channel goes to full screen
Upload alarm images to FTP server when motion is detected
Upload alarm video to FTP server when motion is detected
Upload alarm images to cloud server when motion is detected
Upload alarm video to cloud server when motion is detected
Enable or disable record when motion is detected
Choose which channel(s) you want to record when the motion
Choose the channel to configure
record in both Mainstream & Substream
Enable or disable the record
Choose the channel to configure
Choose the channel to configure
duration in seconds when the motion is detected
Receive an email when motion is detected
detection is triggered