Network / Ddns; Network / Email - Bascom CLIENT User Manual

Network / DDNS

This menu allows you to configure DDNS settings. The DDNS provides a static address to simplify remote connection to your system. To use the DDNS,
you first need to open an account on the DDNS service provider's web page.
DDNS: Check to enable DDNS.
Server: Select the preferred DDNS server (DDNS_3322, DYNDNS,
NO_IP, CHANGEIP, DNSEXIT).
Hostname: Enter the domain name you created on the DDNS service
provider's web page. This will be the address you type in the URL
box when you want to connect remotely to the system via PC. For
example: mycamerasystem.no-ip.org.
User/Password: Enter the Username and password you obtained when
creating an account on the DDNS service provider's web page.
After all parameters are entered, click Test DDNS to test the DDNS
settings. If the test result is "Network is unreachable or DNS is incor-
rect", please check whether the network works fine, or the DDNS
information is correct or not.

Network / Email

This menu allows you to configure email settings. Please complete these settings if you want to receive the system notifications on your email when an
alarm is triggered, HDD becomes full, HDD is in error state, or Video Loss occurs.
Enable if your email server requires the SSL or TLS verification. If you are
Enter the SMTP port of your email server
Enter the SMTP server address of your email
Enter the email address where you want to receive the event
Configure the length of the time interval between the notification
To make sure all settings are correct, click Test Email. The system sends an automated email message to your inbox. If you received the test email, it means
the configuration parameters are correct.
Enable or disable to receive email
not sure, set it to Auto.
Enter your email address
Enter the password of your email
Enter a sender name for the system
notifications
emails