System Maintenance - Bascom CLIENT User Manual

System / Multi-User
The system supports the following account types:
ADMIN — System Administrator: The administrator has full
control of the system, and can change both administrator and
user passwords and enable/disable password protection.
USER — Normal User: Users only have access to live viewing,
search, playback, and other functions.
You may set up multiple user accounts with varying levels of
access to the system.
System / Maintenance
Log Searching and Backing Up:
1. Choose the starting date & time for your search from the
Begin and End Time.
3. Select the type of events you would like to search for from
the dropdown next to Major Type.
4. Click Search.
5. Browse system log events from your search period:
Use the < / > buttons in the bottom-right corner of the menu
to move between pages of system log events.
6. Click Export to create a backup of the system log for your
search period.
Load Default :
Reset the systems settings to its out-of-box state. You can
choose to reset all settings at once, or just settings on specific
menus. Restoring default settings will not delete recordings
and snapshots saved to the hard drive.
Check the items you want restore, or check Select All to
choose all items. Click Save to load default settings of your
chosen items.
Upgrade :
1. Scan the firmware file (.sw file) from your computer.
2. Click Start to start system upgrade. The system upgrade will
last around 5-10 minutes, please do NOT power off the sys-
tem or remove the USB flash drive during firmware upgrade.
Auto Reboot :
This menu allows the system to auto reboot regularly. It is rec-
ommended to leave this function enabled, as it maintains the
operational integrity of your system.